THE BEST AUTOMOTIVE LIGHTING
UNDERGLOW
UNDERGLOW
Couldn't load pickup availability
- Ultra-Bright
- Waterproof
- Warranty
Turn heads wherever you go with Underglow!
Underglow offers simple installation, the brightest LEDs, industry-leading durability, and an extended warranty, making it the perfect choice for lighting up the underside of your vehicle.
- Compatible with both remote and app control
- Over 16 million vibrant colors
- 54+ scenes and music modes
- Built-in toggle switch for easy access
- IP68-rated durability and waterproofing
- 36-month warranty
Each kit includes 6 LED strips with extension cables for endless applications. Underglow comes in two sizes— Standard and Extended—with a total of four strips for the front and back, as well as one pair for each side. An Extension kit is available for additional length if you want to more coverage.
APP or Remote Control
PRE-PROGRAMMED SCENES AND MUSIC MODE
A user-friendly smartphone app offers over 54 adjustable color-chasing patterns, music modes, and 16 million stunning colors, with the ability to save your preferences on the included remote control for quick access.
Pro Series LED Strips
RGBIC DREAM COLOR STRIPS
Our flexible lighting strips feature silicone-coated, high-performance LED chips with waterproof connectors, delivering over 10,000 lumens per kit. Experience maximum brightness and exceptional durability with Underglow.
Dedicated Toggle Switch
ON/OFF SWITCH FOR EASY ACCESS
A built-in toggle switch is routed into your cabin for easy access. Proper use of the toggle switch not only conserves your battery but also provides the safest option for turning off your lighting kit.
Extended Protection Plan
THE ULTIMATE FULL COVERAGE
Enjoy ultimate peace of mind with a 36-month warranty on defective parts. Our staff is readily available to assist with any inquiries you may have regarding installation or replacement.
IN THE BOX
- 2 Strips for Front (60cm or 90cm)
- 2 Strips for Back (60cm or 90cm)
- 2 Strips for Sides (150cm or 180cm)
- 4 Extension cables (6.5' each)
- Remote Control
- Fuse, Switch and Controller
- Hardware for Installation
- User Guide
HOW TO INSTALL
Underglow kit is fairly easy to install as long as you have basic tool knowledge. Each kit comes with everything you need for successful installation.
- Step 1: Attach the LED Strips to the vehicle.
Set the LED strip under your vehicle following directions of arrows marked on each strip. If needed, temporarily mount the strips using LED tape. Use the extension wires and included zip ties and mounting brackets to permanently secure the LED strip to your vehicle. The zip ties or mounting brackets should be placed every 1-2 feet under the vehicle.
- Step 2: Route the wires.
Route the wires under the vehicle connecting all LED Strips. We recommend hiding the cords that connect each lights strip behind the fender to avoid damage due to road conditions etc.
- Step 3: Connect the wires to the module.
Place the Bluetooth Controller in the engine bay or another safe and dry area and connect the wires to the Bluetooth module and route the switch and controller in cabin.
- Step 4: Powering Bluetooth controller.
Connect the Bluetooth controller power wire (red wire) to the battery + positive terminal using the kit supplied hardware. Connect the black wire to the negative terminal post or ground to any metal in engine bay.
User guide with detailed instructions is included in the box.
IP68 WATERPROOF
Our Pro series LED strips are rated for IP68 rating, meaning it's protected from moisture or dust getting inside and can withstand being submerged in water. LED’s are sealed in a silicone tube with clear silicone glue and weatherproof rubber gaskets between quick connectors ensuring durability even in the face of harsh weather conditions like snow, ice, and storms.
CALIBRATION
Connecting to the Controller:
- Install the smartphone app via the QR code on the controller/user manual (compatible with iOS & Android).
- Power on the controller, pair it with the app, and consult the manual for wiring instructions.
Important: All strips must be properly connected to the controller before starting calibration.
Channel 1:
- Select Channel 1 in the app, tap the three dots (top-right), and choose "Color Calibration."
- Complete the process.
Channel 2:
Repeat the steps above for Channel 2.
Confirming Setup: Once calibrated, control channels individually or together to sync colors with the app.